Is it possible to remove control arm bushings without a press? Find out how we do it in wellness tree twin falls, 1950 Newburyport MA Budget Build Garage. We'll show you 2 easy (and cheap) ways to re. Jun 20, I have been using a ball joint press to remove the bushings. It just seems easier to setup than the press, and the ball joint press has a bunch of adaptors with it.
It is the OTC kit, but the down side is it costs more than the Hydraulic press. If getting a press, get the Mar 12, Aug 4, Location: So. Lake Tahoe CA. USA. The quick way is to burn them out with an Acetylene Torch and then remove the shaft before knocking out the bushings. If you have a shop press, you can push the shaft and force out one bushing than then slip out the shaft before pushing out the opposite side.
Another common way is with an pneumatic. Oct 13, Removing the OE Bushing. Before you can install your new bushing, 22201 Arlington VA have to remove the old one. If you need help removing your OE bushing, check out our How-To Burn Out Bushings: The Right Way article.
Be sure to consult your installation instructions before you remove the outer shell, as a lot of aftermarket bushings require the use of the OE shell.Estimated Reading Time: 7 mins. Apr 04, Hi guys, on other old cars I have sometimes gotten away with pounding the control arm bushings out carefully using a mini sledge and an appropriately sized piece of pipe, and then I was able to press the new ones in using a threaded rod, some nuts, and a bunch of washers.
Mar 29, 2. Remove the bushing with a hydraulic press. This is the easiest way to remove the bushing. Place the bushing part of the arm into the hydraulic press and activate the press.
Listen closely, as there will be a popping noise as the bushing moves, and the arm will become loose when the bushing is completely bushremoval.buzz: 54K.